ENGLISH

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual searching to tune into a particular station.

Searching a station automatically: Auto search

 

1- 1

LO MODE 1- 2 2

1 1

2

Select the band.

 

 

1Press FUNC to select the tuner as the source.

2Press BAND to select the band (FM1, FM2, FM3 or AM).

Selected band (then clock time: see page 25) appears.

Level meter (see page 25)

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2

To search stations of

Start searching a station.

higher frequencies

When a station is received, searching stops.

To search stations of lower frequencies

To stop searching before a station is received, press the same button you have pressed

for searching.

To tune in FM stations only with strong signals

This function works only while searching FM stations, including SSM preset (see page 8).

1 Press MODE.

“MODE” appears on the lower part of the display, and the number buttons can work as different function buttons.

2 Press LO (Local), while “MODE” is still on the display, so that the LOCAL indicator lights up on the display.

Each time you press the button, the LOCAL indicator lights up and goes off alternately.

6