ENGLISH
Category | Menu items | Selectable settings, [reference page] | |||
|
| • | AF ON | : When the currently received signals become weak, the unit | |
|
| Alternative |
|
| switches to another station (the programme may differ |
|
| frequency/ |
|
| from the one currently received), [9]. |
|
| regionalization |
|
| • The AF indicator lights up. |
|
| reception | • | : When the currently received signals become weak, the | |
|
|
|
|
| unit switches to another station broadcasting the same |
|
|
|
|
| programme. |
|
|
|
|
| • The AF and REG indicators light up. |
|
|
| • | OFF | : Cancels. |
|
|
|
|
| |
|
| PTY OFF, PTY | Activates PTY Standby Reception with one of the PTY codes, | ||
|
| PTY standby | codes | [9]. | |
|
|
|
|
| |
| TUNER | TA VOLUME *4 | VOLUME 00 | Initial: VOLUME 15 | |
| Traffic | – VOLUME 50 |
| ||
|
|
| |||
|
| announcement | (or VOLUME 00 |
| |
|
| volume | – VOLUME 30)*5 |
| |
|
| • | SEARCH ON | : Activates Programme Search, [9]. | |
|
| Programme search | • | SEARCH OFF | : Cancels. |
|
|
|
|
|
|
|
| MONO*6 | • | MONO ON | : Activate monaural mode to improve FM reception, but |
|
| Monaural mode |
|
| stereo effect will be lost, [7]. |
|
|
| • | MONO OFF | : Restore the stereo effect. |
|
| IF BAND | • | AUTO | : Increases the tuner selectivity to reduce interference noises |
|
| Intermediate |
|
| between adjacent stations. (Stereo effect may be lost.) |
|
| frequency band | • | WIDE | : Subject to interference noises from adjacent stations, but |
|
|
|
|
| sound quality will not be degraded and the stereo effect |
|
|
|
|
| will remain. |
|
|
|
|
| |
|
| FADER*7 | R06 – F06 | : Adjust the front and rear speaker output balance. | |
|
| Fader |
|
| [Initial: 00] |
|
|
|
|
| |
|
| BALANCE | L06 – R06 | : Adjust the left and right speaker output balance. | |
|
| Balance |
|
| [Initial: 00] |
|
|
|
|
|
|
| AUDIO | LOUD | • | LOUD OFF | : Cancels. |
| Loudness | • | LOUD ON | : Boost low and high frequencies to produce a | |
|
| ||||
|
|
|
|
| sound at a low volume level. |
|
|
|
|
| |
|
| AUX ADJUST | AUX ADJ 00 | : Adjust the auxiliary input level to avoid the sudden | |
|
| Auxiliary input | — AUX ADJ 05 | increase of the output level when changing the source to | |
|
| level adjustment |
|
| external component connected to the AUX input jack on |
|
|
|
|
| the control panel. |
|
|
|
|
| |
*4 | Only for FM Radio Data System stations. |
| |||
*5 | Depends on the amplifier gain control. |
| |||
*6 | Displayed only when the source is “FM.” |
| |||
*7 | If you are using a | ||||
14SETTINGS