ENGLISH

Adjusting the sound

You can adjust the sound characteristics to your preference.

1

2

*4 This adjustment will not affect the subwoofer output. *5 Range adjustment for super bass is adjustable only

when it is set to “S.BS ON.“

*6 Depending on the amplifier gain control setting. (See page 14 for details.)

General settings — PSM

You can change PSM (Preferred Setting Mode) items (except “SID”) listed in the table on pages 13 and 14.

Indication, [Range]

BAS*2 (bass), [–06 to +06]

Adjust the bass.

MID*2 (mid-range), [–06 to +06]

Adjust the mid-range frequencies sound level.

TRE*2 (treble), [–06 to +06]

Adjust the treble.

FAD*3 (fader), [R06 to F06]

Adjust the front and rear speaker balance.

BAL*4 (balance), [L06 to R06]

Adjust the left and right speaker balance.

S.BS*2 (super bass), [S.BS ON or S.BS OFF], [01 to 05, initial: 03]*5

Maintain the richness and fullness of the bass sound regardless of how low you set the volume.

SUB.W*1 (subwoofer), [00 to 08, initial: 04] Adjust the subwoofer output level.

VOL (volume), [00 to 30 or 50*6]

Adjust the volume.

*1 Displayed only when “L/O MODE” is set to “WOOFER” (see page 14).

*2 When you adjust the bass, mid-range, treble, or super bass, the adjustment you have made is stored for the currently selected sound mode (iEQ) including “USER.”

*3 If you are using a two-speaker system, set the fader level to “00.”

1

2Select a PSM item.3Adjust the PSM item selected.4Repeat steps 2 and 3 to adjust other PSM items if necessary.5Finish the procedure.

12