JVC KD-S7250 manual Sound Adjustments, Turning on/off the loudness function, Adjusting the sound

SOUND ADJUSTMENTS

ENGLISH	Adjusting the sound
	You can adjust the sound characteristics to your
	preference.
	1 Select the item you want to adjust.
		Each time you press the button, the
		adjustable items change as follows:
		BAS	TRE		FAD
		(bass)	(treble)		(fader)
		VOL			BAL
		(volume)		(balance)
	Indication	To do:			Range
	BAS	Adjust the bass.		–06 (min.)
	(Bass)
				+06 (max.)
	TRE	Adjust the treble.		–06 (min.)
	(Treble)
				+06 (max.)
	FAD*	Adjust the front		R06 (Rear only)
	(Fader)*	and rear speaker
		balance.		F06 (Front only)
	BAL	Adjust the left		L06 (Left only)
	(Balance)	and right speaker
		balance.		R06 (Right only)
	VOL	Adjust the volume.		00	(min.)
	(Volume)
				50	(max.)

Note:

*If you are using a two-speaker system, set the fader level to “00.”

2 Adjust the level.

To increase the level.

To decrease the level.

Equalization pattern changes as you adjust the bass or treble.

Note:

Normally the control dial works as the volume control. So you do not have to select “VOL” to adjust the

14volume level.

Turning on/off the loudness function

The human ear is less sensitive to low and high frequencies at low volumes.

The loudness function can boost these frequencies to produce well-balanced sound at low volume level. Each time you press LOUD, the loudness function turns on and off alternatively.

Loud indicator

\

Using the Sound Control Memory (SCM)

You can select and store a preset sound

adjustment suitable to each playback source.

(Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored each of the following sources — FM1, FM2, FM3, AM and CD.

•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “ To Cancel Advanced SCM” on page 18.

Select the sound mode you want.

Each time you press the button, the sound mode changes as follows:

SCM OFF BEAT SOFT POP