Changing the AM/FM channel intervals
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and 200 kHz for FM (AREA US settings).
You will have to change the channel intervals when using this unit in an area other than North America and South America.
•AREA EU: Select this when using this unit in an area other than North and South America. (9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM)
•AREA US: Select this when using this unit in North or South America. (10 kHz for AM and 200 kHz for FM)
1.Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears on the display.
2.Select “AREA” with 
¢ or 
4.
3.Select the desired mode with the control dial. The AM/FM channel interval changes as follows:
AREA EU 
AREA US
ENGLISH
Selecting the external component to use
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor
To use the external component as the playback source through this unit, you need to select which component — CD changer or external component — to use. When shipped from the factory, CD changer is selected as the external component.
• LINE IN: To use the external component other than CD changer
• CHANGER: To use the CD changer
1.Change the source to FM, AM or CD with FM/AM or CD.
2.Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears on the display.
3.Select “LINE IN” with 
¢ or 
4.
4.Select the desired mode with the control dial.
The external component selecting mode changes as follows:
LINE IN 
CHANGER
Note:
For connecting the Line Input Adaptor
29
