JVC KDR650 +05, Cancel, press Menu, Displayed only when L/0, Not applicable for KD-AR755

AUDIO

SETTINGS

DISPLAY.

SETTINGS

HPF*	6
FADER*2*		7
BALANCE*2*7
VOL ADJUST

OFF: All signals are sent to the front/rear speakers. ; LOW 1OOHz I
MID			HIGH 150Hz: Audio signals with frequencies lower
120Hz I
than 100 Hz/			120 Hz/ 150 Hz are cut off from the fr.ont/rear speakers.
R06- F06		(00):		Adjusts the front and rear speaker outp~~ bal~nc~
·L06- R06		(00):		Adjusts the left and right speaker output balance.
-
-05 -	+05		(00): Presets the volume adjustment level of each
source	(compared to the FM volume level) . Before adjustment,
select the source you want to adjust. ("VOL ADJ FIX" appears if FM is
selected.)				·

KO-AR75S I KO-R7SO KO-ARSSS

KO-R6SO I KO-R450

AMP GAIN	LOW POWER: Limits the maximum volume level to 30. (Select if
	the maximum power of each speaker is less than 50 Wto prevent
	damaging the speakers.) ; HIGH POWER: The maximum volume
	level is 50.
D.T.EXP	ON: Creates realistic sound by compensating the high-frequency
(Digital Track	components·and restoring the rise-time of the waveform that are lost
Expander)	in audio data compression.; OFF: Cancels.
-----

1	Press and hold MENU.
2	Turn the volume knob to make a selection (see the following table),
	then press the knob.
	Repeat step 2 until the desired item is selected.
•	To return to the previous setting item or hierarchy, press~ PTY.
•	To
	cancel, press MENU.

TEL MUTING*S

L/0 MODE*S

ON:
Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).; OFF: Cancels.
- ~~---~-·--~	~----- ---·-
---------~---- ~ ~~- -------
SUB.W I REAR: Selects whether rear speakers or asubwoofer are
connected to the REAR/SW line out terminals on the rear panel
(through an external amplifier).

	Default:	XX
DIMMER	Selects the display and button illumination adjusted in the [BRIGHTNESS] setting.
	AUTO: Changes between the day and night adjustments when you turn off or on
	the car headlights. *1 ; ON: Selects the night adjustments.; OFF: Selects the day

*1	Displayed only when (L/0	MODE] is set to [SUB.W] and [SUB.W] is set
	to [ON].
*2	This adjustment will not
*3	affect the.subwoofer output.
	Displayed only when
*4	[SUB.W] is set to [ON].
	Displayed only when [L/0	MODE] is set to [SUB.W).
*S	Not applicable for KD-AR755.
*6	KD-AR755 only.	.
*7	If you are using a two-speaker system, set the fader level to [00].
*8	Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT].

BRiG.HTNiss		adjustments.		---- -----··--	····----·------··------
		---S~t~ th-~b~tt~~: -displayand USB input terminal brightness for day and night
		separately.
		1	DAY I NIGHT: Select day or night.
		2	Select azone for setting. (+Illustration above)
scRoi~L~2- -		3	Set the brightness level (00 to 31 ). (Default: DAY: 31		; NIGHT: 15.)
		- --oNce: s~~~~~~th~d~pla"Y-i~t~~~~ti~~--~~~~~- ;-Aur(i-R;p;t~-~~~-.;~li~-9~15~~;~~~d
		intervals. ; OFF: Cancels.		•
		--
*1	The illumination control wire connection is required. (+19)
*2	Some characters or symbols will not be shown correctly ~or will be blanked).

12