JVC KS-AX4504 user service Speaker Connections, KS-AX4302

SPEAKER CONNECTIONS

Connection varies depending on the number of the speakers used in your car. Select the appropriate connection referring to the following diagrams.

Before connecting: Securely connect all the parts. If the connections are loose, due to contact resistance etc., heat will break out and may cause an accident. Secure and cover the cords with insulating tape and run them under the car mats.

åWhen your receiver is equipped with Line Output, connect the Line Output (through the receiver) to the INPUT jacks on this unit.

∫When your receiver is NOT equipped with Line Output, connect the provided speaker input connector (through the receiver) to the HIGH INPUT terminal on this unit.

KS-AX4504

4-speaker system

2-speaker system plus subwoofer—Bridge Mode*2

Subwoofer

2-speaker system—Bridge Mode*2

4-speaker system plus subwoofer (PRE OUT)

Down mixed signals are emitted through PRE OUT jacks.

JVC power amplifier:

KS-AX4302, etc.

KS-AX4302

2-speaker system

Subwoofer system—Bridge Mode*2

Subwoofer

2-speaker system (2 amplifiers)—Bridge Mode*2

2-speaker system plus subwoofer (PRE OUT)

JVC power amplifier:

KS-AX4302, etc.

*1 Not provided for this unit.

*2 Bridge Mode: Be sure to connect the line output from the receiver to the left (L) jack on this unit.

*3 Be sure to connect the both leads to the target speaker lead.

2