JVC KS-F161 manual Sound Adjustments, Turning on/off the loudness function, Adjusting the sound

SOUND ADJUSTMENTS

ENGLISH

Turning on/off the loudness function

The human ear is less sensitive to low and high frequencies at low volumes.

The loudness function can boost these frequencies to produce a well-balanced sound at low volume levels.

Each time you press LOUD, the loudness function turns on/off alternatively.

LOUD

Adjusting the sound

You can adjust the sound characteristics to your

preference.

1 Select the item you want to adjust.

Each time you press the button, the adjustable items change as follows:

J

Selecting preset sound modes

You can select a preset sound adjustment suitable to the music genre.

Each time you press SOUND, the sound mode changes as follows.

SOUND

SCM OFF (BEAT) (POP) (SOFT)

Indication	For:		Preset values
		BAS		TRE	LOUD
SCM OFF	(Flat sound)	00		00	On
BEAT	Rock or	+2		00	On
	disco music
POP	Light music	+4		+1	Off
SOFT	Quiet
	background	+1		–3	Off
	music

Note:

•You can adjust the preset sound mode to your preference, and store it in memory.

If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 11.

•To adjust only the bass and treble reinforcement levels to your preference, see “Adjusting the sound” on page 10.

•When one of the sound modes is selected, it is shown on the display as follows:

For example, when “POP” is selected.

10

BAS			TRE				FAD
(bass)			(treble)				(fader)
		VOL			BAL
	(volume)			(balance)
Indication		To do:					Range
BAS	Adjust the bass.					–6 (min.)
(Bass)
						+6 (max.)
TRE	Adjust the treble.					–6 (min.)
(Treble)
						+6 (max.)
FAD*	Adjust the front					R6 (Rear only)
(Fader)	and rear speaker
	balance.					F6 (Front only)
BAL	Adjust the left					L6	(Left only)
(Balance)	and right speaker
	balance.					R6 (Right only)
VOL	Adjust the volume.					00	(min.)
(Volume)
						50	(max.)

*If you are using a two-speaker system, set the fader level to “00.”

2 Adjust the level.

To increase the level.

To decrease the level.

Note:

Normally, the +/– buttons works as the volume control. So you do not have to select “VOL” to adjust the volume level.