ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, POP, SOFT) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
• See page 11 for details.
SOUND
BEAT POP SOFT LOUD
4 To turn on or off the loudness function.
Each time you press LOUD, the loudness function turns on and off alternately. See page 11 for details.
LOUD
5 Repeat steps 2 and 3 to adjust the other items.
6 Press and hold SOUND until the sound mode you have selected in step 1 flashes on the display.
Your setting is stored in memory.
SOUND
2 Select “BAS” (Bass) or “TRE” (Treble).
BEAT POP SOFT LOUD
7 Repeat the same procedure to store other settings.
To reset to the factory settings
| Repeat the same procedure and reassign the |
3 | preset values listed in the table on page 11. |
Adjust the bass or treble level. |
• See page 11 for details.
12
