BASIC OPERATIONS
ENGLISH
132
Turning on the power
1 Turn on the power.
Note on
•When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
•If the cassette is already in the cassette compartment, tape play starts automatically. However, it is not recommended to leave the cassette in the compartment when turning off the power or ignition key. It may damage the tape head and the cassette.
2 Select the source.
To operate the tuner (FM or AM),
F M
4 Adjust the sound as you want (see pages 11 – 12).
To drop the volume in a momentPress briefly while listening to any
source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the powerPress and hold for more than 1 second.
Note:
When you use this unit for the first time, set the
A M
see pages 6 – 9. To operate the tape,
see page 10.
To operate the CD changer,
see pages 15 – 16.
3 Adjust the volume.
To increase the volume.
To decrease the volume.
PTY TP
Volume level appears
5