Specifications, FM Tuner, AM Tuner

SPECIFICATIONS

Maximum Power Output: Front: 40 watts per channel Rear: 40 watts per channel

Continuous Power Output (RMS):

Front: 16 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8% total harmonic distortion.

Rear: 16 watts per channel into 4 Ω, 40 to 20,000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 to 8 Ω allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble:±10 dB at 10 kHz Frequency Response: 40 to 20,000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 1.0 V/20 kΩ load (250 nWb/m)

Frequency Range

FM: 87.5 to 107.9 MHz

(with channel interval set to 200 kHz) 87.5 to 108.0 MHz

(with channel interval set to 50 kHz) AM: 530 to 1,710 kHz

(with channel interval set to 10 kHz)

531 to 1,602 kHz

(with channel interval set to 9 kHz)

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity:

16.3dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 to 15,000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

Sensitivity: 20 μV

Selectivity: 35 dB

	CASSETTE DECK SECTION
	CASSETTE DECK SECTION	ENGLISH
	50 to 16,000 Hz (± 3dB)	ENGLISH
	Wow & Flutter: 0.11% (WRMS)
	Fast-Wind Time: 100 sec. (C-60)
	Frequency Response:
	Signal-to-Noise Ratio: 54 dB
	Signal-to-Noise Ratio: 54 dB
	Stereo Separation: 40 dB
	GENERAL
	Power Requirement
	Operating Voltage: DC 14.4 volts (11 to 16
	volts allowance)
	Grounding System: Negative ground
	Dimensions (W x H x D)
	Installation Size:
	182 x 52 x 150 mm
	(7-3/16" x 2-1/16" x 5-15/16")
	Panel Size: 188 x 58 x 14 mm
	(7-7/16" x 2-5/16" x 5/8")
	Mass: 1.4 kg (3.1 lbs) (excluding accessories)

Design and specifications subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.