JVC KS-FX230, F130 manual Other convenient tuner functions, Scanning broadcast stations

Other convenient tuner functions

SEL	SSM ¢
	SSM 4	MO/RND (For KS-FX230)

MO (For KS-F130)

+/–

Scanning broadcast stations

SCAN/RPT (For KS-FX230) SCAN (For KS-F130)

When you press SCAN/RPT (for KS-FX230) or SCAN (for KS-F130) while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted.

If you want to listen to that program, press the same button again to stop scanning.

Selecting FM reception sound

When an FM stereo broadcast is hard to receive:

Press MO/RND (mono/random: for KS-FX230) or MO (mono: for KS-F130) while listening to an FM stereo broadcast.The sound you hear becomes monaural but reception will be improved.

Lights when receiving an

FM broadcast in stereo.

LOUD ST LOUD MO

To restore the stereo effect, press the same button again.

Changing the AM/FM channel intervals

When using this unit in an area other than North or South America:

When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and 200 kHz for FM. You can change the channel intervals by following the procedure below.

1 Press SEL (select) for more than 2 seconds.

“CLOCK H,” “CLOCK M” or “AREA” appears on the display.

2 If “AREA” does not appears, press SSM ¢ or SSM 4 until it appears.

3 Press +.

“AREA EU” appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM.

To reset to the factory setting, follow the above step 1 and 2, then press – in step 3 (“AREA US” appears on the display.)

AREA EU: Select this when used in an area other than North and South America.

AREA US: Select this when used in North or South America.

8