ENGLISH

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component — CD changer or external component — to use. When shipped from the factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer

• CHANGER: To use the CD changer

1. To change the source to FM, AM or TAPE, press FM/AM or TAPE 2 .3

2.Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

3.Select “LINE IN” with ¢or 4.

4.Select the desired mode with the control dial.

The external component selecting mode changes as follows:

LINE IN CHANGER

Note:

For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

30