Bluetooth connectioniPod/iPhone
By connecting the supplied
connecting the microphone. |
|
|
Once the USB Bluetooth Adapter is attached, this unit is always |
|
|
available for pairing. |
|
|
Refer also to the instructions supplied with the Bluetooth |
|
|
device. |
|
|
Refer to the separate appendix to check the countries where | Microphone | |
you may use the Bluetooth function. |
|
|
If you turn off the unit or unplug the USB Bluetooth Adapter during a phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone.
This unit supports the following Bluetooth profiles
Object Push Profile (OPP 1.1)
Phonebook Access Profile (PBAP 1.0)
Advanced Audio Distribution Profile (A2DP 1.2)
Audio/Video Remote Control Profile (AVRCP 1.3)
Warning:
Stop the car in a safe place before operating complicated steps such as dialing numbers, using phonebook, etc.
Pairing a Bluetooth device
When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the device.
Up to five Bluetooth devices can be registered in this unit.
A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time.
This unit supports Secure Simple Pairing (SSP).
1Connect the USB Bluetooth adapter
USB input terminal
USB cable from the rear of the unit
or
2Search and select “JVC Unit” on the Bluetooth device.
For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching.
ENGLISH 15