Bluetooth connection
3Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below
A | Pairing? |
| Pairing? |
| Device: [Device name] |
| Yes: Press VOL |
| Passkey: XXXXXX |
| No: Press BACK |
“XXXXXX” is a
Ensure that the passkey which appears on the unit and Bluetooth device is the same.
Select “Yes” to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
B | Pairing? |
| Pairing? |
|
| Yes: Press VOL | |
| Device: [Device name] |
| |
|
| No: Press BACK | |
|
|
| |
|
|
|
|
(1) When the Bluetooth device prompts you to key in a PIN or passcode, enter the PIN code “0000” into the Bluetooth device. The above should then appear on the display.
You can change to a desired PIN code before
pairing. ( page 30)
(2)If only “Pairing” appears, operate the Bluetooth device to confirm pairing.
Select “Yes” to confirm the pairing.
After pairing is successful, “Pairing COMPLETED” appears on the display.
The unit will establish a connection with the newly paired Bluetooth device and you can then control the Bluetooth device through the unit.
“” will light up when a phone is connected.
“” will light up when an audio device is connected.
Once the connection is established, the device is registered to the unit and there is no need to perform the pairing again unless you delete the registered device.
Some Bluetooth devices may not be able to connect to the unit after pairing. Connect the device to the unit manually. Refer to the instruction manual of the Bluetooth device for more information.
Connecting/Disconnecting a registered device manually
To connect
1 
(Hold)
2Select <Connect>.
3Select the desired device.
“Connecting...” appears on the display when the unit is connecting to the device. “Connected”#“[Device Name]” appears on the display when the device is connected.
4Press MENU to exit.
To disconnect
1 
(Hold)
2Select <Disconnect>.
3Select the desired device.
“Disconnected”#“[Device Name]” appears on the display when the device is disconnected.
4Press MENU to exit.
16 ENGLISH