Satellite Radio tuner control
Before operating, connect either one of the following systems (not supplied) to the expansion port on the rear of this unit. Refer to the “Installation/Connection Manual” for details.
JVC
SCVDOC1 (SiriusConnect Vehicle Docking Kit) and SIRIUS radio
XMDJVC100 (Smart Digital Adapter for JVC) and XM Universal Tuner Box CNPJVC1 (Connection cable for JVC) and CNP2000UCA (Protocol Interface
Adapter and XM Direct 2 Tuner)
For details, refer also to the instructions supplied with the other components.
For SIRIUS/XM programming, visit <www.siriusxm.com>.
Activating your SIRIUS subscription
1Select <SIRIUS>.
SIRIUS Satellite Radio starts updating the SIRIUS channels. Once completed, SIRIUS Satellite Radio tunes in to the Preview Channel.
2Select “Channel 0” to check your SIRIUS ID.
The
You can also check your SIRIUS ID from the label on the packaging, or from menu
operations ( page 29).
3Contact Sirius Satellite Radio on the internet at <www.siriusxm.com/ activatenow> to activate your
subscription.
Once subscription has been activated, “SUB UPDATE PRESS ANY KEY” appears on the display.
Channel Updates (SIRIUS)
If channels are updated after subscription, updating starts automatically. “UPDATING” appears and no sound can be heard.
Updates take a few minutes to complete.
During an update, you cannot operate your Satellite Radio.
Activating your XM subscription
1Select <XM>.
XMDirect2 Tuner System starts updating all the XM channels. “Channel 1” is tuned in automatically.
2Select “Channel 0” to check your XM Satellite Radio ID.
The display alternates between “RADIO ID” and the
You can also check your XM Satellite Radio ID labeled on the casing of the XMDirect2 Tuner System.
3Contact XM Satellite Radio on the internet at <www.siriusxm.com/activatenow> to
activate your subscription.
Once subscription has been activated, the unit can be tuned to one of the available channels.
ENGLISH 9