Listening to the USB device

This unit can play MP3/WMA files stored on a USB mass storage class device.

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. to the unit.

•You can also connect an Apple iPod/iPhone to the USB input terminal. For details of the operations, 22.

~

Ÿ

]Turn on the power.

USB input terminal

USB memory

All tracks will be played repeatedly until you change the source or detach the USB device.

If you have turned off the power (without

detaching the USB device)...

PressingSOURCE turns on the power and playback starts from where it has been stopped previously.

•If a different USB device is currently attached, playback starts from the beginning.

Stopping playback and detaching the USB device

Straightly pull it out from the unit.

“NO USB” appears. PressSOURCE to listen to another playback source.

You can operate the USB device in the same way you operate the files on a disc. ( 10, 11)

Cautions:

•Avoid using the USB device if it might hinder your safety driving.

•Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.

•Do not start the car engine if a USB device is connected.

•This unit may not be able to play the files depending on the type of USB device.

•Operation and power supply may not work as intended for some USB devices.

•You cannot connect a computer to the USB input terminal of the unit.

•Make sure all important data has been backed up to avoid losing the data.

•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

•Some USB devices may not work immediately after attaching USB device or turn on the power.

•For more details about USB operations, 35, 36.

12ENGLISH