MTS (Multi-Channel Television Sound)

MTS technology allows several audio signals to be
broadcast at once, giving you a choice in what
you wish to hear with a TV program. In addition to
mono or stereo sound, an MTS broadcast may
also include a Second Audio Program (SAP).
P ress the ME N Ub u t t o n
To MTS
Select the mode
(The ON AIR arrow tells you if a broadcast
is in Stereo and/or contains an SAP).
•Keep the TV in STEREO mode to get the best
sound quality. The sound will work in STEREO
mode even if a certain broadcast is in MONO
sound only.
• Choose the MONO setting to reduce excessive
noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an
alternative soundtrack, if one is available.

MTS STEREO SAP MONO

ON AIR
22 Sound Settings
NOTE:

Bass

You can increase or decrease the level of
l o w - f requency sound in the TV’s audio with the
Bass adjustment.
P ress the ME N U b u t t o n
To BASS
To increase the bass
To decrease the bass
To move to the next setting

Treble

Use Treble to adjust the level of high-fre q u e n c y
sound in your TV’s audio.
P ress the ME N Ub u t t o n
To TREBLE
To increase the treble
To decrease the treble
To move to the next setting

Balance

Adjust the level of sound between the TV’s two
speakers with the Balance setting.
P ress the ME N Ub u t t o n
To BALANCE
To shift the balance towards the right
speaker
To shift the balance towards the left
speaker
To move to the next setting

Some Sound Advice

You can tell if a program is broadcast in stereo
by the position of the ON AIR arrow in the MTS
menu screen. Unfortunately, while many
programs are originally broadcast in stereo,
some cable companies may “squash” the
transmission to mono sound because they have
only mono equipment. If you are connected to a
cable system, the sound quality is determined
by the cable company. If they broadcast only in
mono, you will receive only mono sound, even if
the program was aired in stereo.
Fortunately, most stereo programs are
broadcast by the major television networks. If
you connect an antenna to your TV instead of
cable and set the tuner mode in Auto Tuner
Setup to “Air” instead of “Cable” you will be
able to pick up stereo broadcasts in their
original stereo format.
You can leave the Sound Settings menu at any time by pressing the EXITbutton on the remote control.

STEREO