JVC 0305TNH-II-IM, LCT1823-001A-A Audio Out, TV Speaker, Digital-In

Initial Setup

TV Speaker

If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio through your stereo.

		Press the MENU button	INITIAL SETUP
		Press the MENU button	INITIAL SETUP
π†		To TV SPEAKER	PREVIOUS
π†		To TV SPEAKER	VIDEO-1MONITOR OUT	OFF
√®		To turn the TV’s speakers ON or OFF	TV SPEAKER	ON
		Press the MENU button when finished	AUDIO OUT	VARI
		Press the MENU button when finished	DIGITAL-IN	SIZE1
			DIGITAL-IN AUDIO	DIGITAL
Notes:			CENTER CH INPUT	OFF
•	Before you turn the TV speaker setting from OFF to		NEXT PAGE	(1/5)
•	Before you turn the TV speaker setting from OFF to		SELECT OPERATE	MENU EXIT
	ON, make sure that the TV volume level is low! If
	the TV volume is set too high, the sound level will be extremely loud.
•	After a power interruption, the TV speaker settings will return to “ON”.

Audio Out

If your television is connected to an external speaker source, audio out gives you the option of controlling the volume level with your TV’s remote control.

Press the MENU button

π† To AUDIO OUT √® To VARI or FIX

Press the MENU button when finished

VARI: Lets you adjust the volume of the external speakers using the VOLUME+/– buttons on your TV’s remote control.

FIX: The volume of the external speakers is adjusted using the audio device’s remote control.

Digital-In

INITIAL SETUP

	VIDEO-1MONITOR OUT	OFF
	TV SPEAKER	ON
	AUDIO OUT	VARI
	DIGITAL-IN	SIZE1
	DIGITAL-IN AUDIO	DIGITAL
	CENTER CH INPUT	OFF
	NEXT PAGE	(1/5)
	SELECT OPERATE	MENU EXIT

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p picture signal is being displayed on the screen. There are two types of 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.

Press the MENU button	INITIAL SETUP


	PREVIOUS
π† To DIGITAL-IN	VIDEO-1MONITOR OUT	OFF
π† To DIGITAL-IN	TV SPEAKER	ON
√® To enter	AUDIO OUT	VARI
√® To enter	DIGITAL-IN	SIZE1
√® To select SIZE1 or SIZE2	DIGITAL-IN AUDIO	DIGITAL
Press the MENU button to finish	CENTER CH INPUT	OFF
Press the MENU button to finish	NEXT PAGE	(1/5)
	SELECT OPERATE	MENU EXIT

Note:

The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the Digital-In terminal and the picture is being displayed on the screen.