Quick Setup

Connections

 

 

Connecting to a Digital TV Receiver

By connecting a Digital TV Reciever, high definition pictures can be displayed on your TV in their digital form.

DTV Decoder

DIGITAL OUT

AUDIO OUT

L R

 

AUDIO

 

AUDIO

VIDEO

S-VIDEO

COMPONENT VIDEO

75Ω

OUT

R

L

 

Y

Pb

Pr

 

 

 

 

 

 

 

(VHF/UHF)

 

 

 

 

INPUT-3

 

 

 

R

 

 

 

INPUT-2

 

 

 

 

 

 

 

 

 

OPTICAL OUT

 

 

 

 

OVER

 

 

 

 

 

 

 

 

 

Digital

L

 

 

 

 

 

 

 

 

 

 

INPUT-1

 

 

Audio

 

 

 

 

 

 

 

 

 

 

OVER

 

 

HDMI to DVI Cable

After the connections have been made, tighten the screw to secure the cables.

TV Rear Panel

DIGITAL-IN

VIDEO (DIGITAL)

AUDIO (DIGITAL)

1)Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to the DIGITAL-IN on the back of your television.

2)Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO IN into VIDEO-3 on the back of your television.

3)Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO IN into VIDEO-3 on the back of your television.

•The digital-in terminal is not compatible with the picture signal of a personal computer.

•Use a HDMI to DVI cable (commercially available) in order to digitally connect the television with a DTV decoder.

Notes:

•If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer to page 46.)

•When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to ANALOG. See "DIGITAL-IN AUDIO", page 46.

17