HOW TO HANDLE BASIC OPERATIONS
BASIC OPERATION
1. Press the POWER switch to turn on the power.
_ON : Power turns ON. (Power indicator: lit)
ON
OFF
POWER
2. Press the INPUT SELECT button to choose input.
B | A | Selects video/audio signals input to terminals on the rear | |||||
|
|
|
| panel. |
|
| |
|
|
|
|
|
|
| |
|
|
|
| INPUT | Terminals on the rear panel | ||
| INPUT SELECT |
| SELECT |
|
| ||
Video signal input | Audio signal input | ||||||
|
|
|
| button | |||
|
|
|
| 1 Input A | VIDEO A terminal | AUDIO A terminal | |
|
|
|
|
|
|
| |
|
|
|
| 2 Input B | VIDEO B terminal | AUDIO B terminal | |
|
|
|
|
|
|
| |
3.Press the VOLUME/SELECT buttons to adjust the speaker volume.
– | + | Press this button to display the speaker volume level on the |
|
| screen. |
+: The
VOLUME/SELECT
* Screen indication will disappear about 10 seconds after operating.
PICTURE ADJUSTMENT
1.Press select button corresponding to the item you want to adjust.
The item you select is displayed on the screen.
1PHASE ( 
) : Phase control
2 CHROMA ( 
) : Chroma control
PHASE CHROMA BRIGHT CONTRAST 3 | BRIGHT ( ) : Brightness control | ||||||||
|
|
|
|
|
|
|
| 4 | CONTRAST ( ) : Contrast control |
|
|
|
| ||||||
2. Adjust with the VOLUME/SELECT buttons.
– | + | Items | VOLUME/SELECT button | ||
|
| – | + | ||
|
|
| |||
VOLUME/SELECT | PHASE | reddish | greenish | ||
(Phase) | |||||
|
|
|
| ||
|
| CHROMA | lighter | deeper | |
|
| (Chroma) | |||
|
|
|
| ||
|
| BRIGHT | darker | brighter | |
|
| (Brightness) | |||
|
|
|
| ||
|
| CONTRAST | lower | higher | |
|
| (Contrast) | |||
|
|
|
| ||
*Screen indication will disappear about 10 seconds after operating.
Colour system indication (PAL or NTSC)
PAL
With regard to Colour system indication
●With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the colour system indication appears for about 3 seconds on the screen while PAL or NTSC signals are being detected.
It does not appear when receiving B/W signal or when no signal is input. See page 7 for COLOR SYSTEM setting.
00 ~ 50
VOLUME : 20
– | + |
PHASE : 00
– | + |
Notes:
●Phase control is effective only in the NTSC colour system mode.
●Chroma control is not effective when receiving B/W or when no signal is input.
●When the Chroma control is set to level
●“NO EFFECT” is displayed (For about 3 seconds) when your selected function has no effect.
6
