Quick Setup

Connecting to a Digital TV Receiver

By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in their digital form.

 

INPUT 3

 

S-VIDEO

 

 

Y

COMPONENT

VIDEO

 

PB

L

AUDIO

PR

 

R

 

TV Rear Panel

 

INPUT 4

 

INPUT 5

AUDIO

 

 

 

 

 

/ INPUT 1

 

 

 

 

 

AUDIO

OUT

 

 

Y

 

VIDEO

 

VIDEO

 

 

After the connections have been made,

 

COMPONENT

 

AUDIO

 

AUDIO

 

AUDIO

PB

L

L

L

tighten the screw to secure the cables.

 

 

 

 

PR

 

R

 

R

 

R

 

 

 

 

 

 

 

 

 

 

HDMI to DVI Cable

 

 

 

 

 

L

 

R

 

 

 

 

 

 

AUDIO OUT

DIGITAL OUT

75 Ω

DIGITAL AUDIO

INPUT 1

INPUT 2

PHOTO VIEWER /

(VHF/UHF)

OPTICAL OUT

 

 

SERVICE

DTV Decoder

TV Rear Panel

1)Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to the HDMI INPUT-1 on the back of your television.

2)Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO INPUT HDMI AUDIO IN "R" on the back of your television.

3)Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO INPUT HDMI AUDIO IN "L" on the back of your television.

Personal computer compatibility cannot be guaranteed.

Use an HDMI to DVI cable (commercially available) in order to digitally connect the television with a DTV decoder.

Notes:

If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may be slightly shifted. Access the “HDMI Size” in the External Input menu to adjust it. (Refer to page 44.)

When you do the above connection, set "Video-1 Audio" in the External Input menu to "Analog". See "Video-1 Audio", page 44.

The Analog Audio input can only be used with the HDMI INPUT-1.

When setting the “Video-1 Audio - Analog/Digital” menu setting on the TV, please note that this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI adapter this connection must be made to the HDMI INPUT-1 along with analog audio cables.

18