Precautions

Attach the stand to the TV

To prevent scratches on the panel, lay a piece of soft cloth on an even platform and place the TV onto it.

1)

2)

Notes:

•To reinstall the stand, reverse the procedure from 2) to 1).

•If you find it difficult to remove the screws from inset screw wells, use a magnetized screwdriver.

Install your TV

Hole

To prevent the TV from falling, thread the belt through the hole on the back of the standand secure it to the TV rack.

Belt and screw (not included)

Tidying the cables

A cable holder which keeps your connection cables tidy is attached to the back of the stand.

When attaching the TV to the wall

Seal up the two holes at the bottom of the TV using the plates provided. Peel off the protection film on the plates. Then, peel the plates from the paper and stick them on the holes.

9