EN 13

C Select the language.

Press OK. The Language Set display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select your language code.

Language Code

 

 

 

 

 

ENGLISH

:

01

NEDERLANDS

:

06

DEUTSCH

:

02

SVENSKA

:

07

FRANCAIS

:

03

NORSK

:

08

ITALIANO

:

04

SUOMI

:

09

CASTELLANO

:

05

DANSK

:

10

(Example) DEUTSCH (02) is selected for SUISSE (41).

International telephone

Language code

country code

If you are using the on-screen display, the AUTO SET

screen will appear. As Auto

 

 

Set Up progresses, the “q”

 

 

mark on the TV screen

 

 

moves from left to right.

 

 

When the Auto Set Up is

 

 

completed, “SCAN

 

 

COMPLETED” appears for

 

 

about 5 seconds, then the

Beginning

End

normal screen appears.

When you have connected the video recorder to a TV offering T-V Link via a fully-wired 21-pin SCART cable ( pg. 10) and

the TV is turned on, the recorder automatically performs the Preset Download ( pg. 14) even if you select “Auto” for Auto Set Up function.

ATTENTION

On the on-screen display

Press rt to move the highlight bar (pointer) to the language of your choice.

DANSK

SUOMI

NORSK SVENSKA NEDERLANDS CASTELLANO ITALIANO FRANCAIS

DEUTSCH

ENGLISH

Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder’s memory and the recorder will not perform Auto Set Up again. You only need to set the clock. ( pg. 80)

If you have moved to a different area, perform each setting as required.

Tuner setting  pg. 74

Clock setting  pg. 80

If a new station starts broadcasting in your area, perform tuner setting ( pg. 74).

NOTES:

D Perform Auto Set Up.

Press OK. The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “Auto” and press OK or e.

On the on-screen display

Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or e.

“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or

“– –:– –” as illustrated on page 15.

In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

If there is a power cut, or if you press 1 or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.

Auto Clock Set may not function properly depending on the reception condition.

If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 77, “INFORMATION”).

Page 13
Image 13
JVC LPT0678-001A Select the language, Perform Auto Set Up, Press rt to select your language code, As illustrated on