initial settings 15
RF CHANNEL 22
Set Video Channel
if you are using both the rf cable and
21-pin SCART cable for connection Press
PR+ or – to set the Video Channel to OFF.
if you are using only the rf cable for
connection Press PR+ or – to set the Video
Channel to a vacant position between 22 and 68
which is not occupied by any station in your area
(refer to station list on page22).
Exit Video Channel Set Mode
Press o.
To view pictures from your VCR you must now set your TV to either the Video
Channel or to AV mode, depending upon your choice above.
HR-V505EK-EN/p13-16 2/12/03, 6:32 PM15