Auto Trace | This item stores and reproduces manual operation. |
Note:
●As Auto Trace performs simple saving of manual operation, the position may be shifted during playback.
●Digital Flip cannot be used during Auto Trace recording. .
A State | [Record Start] | : The camera will start recording of Pan/Tilt and Zoom |
|
| operations. (for approximately 30 seconds) |
| [Record Stop] | : Click this when a recording operation is complete. |
Memo:
●For details on the manual operation, see [PTZ Control] (A Page 113).
[State] Display
The current status is displayed.
Standby | : The camera is on standby. [Record Stop] is invalid. |
Recording | : The camera is recording. Click [Record Stop] to finish |
| recording. ACompletedB will be displayed. |
Completed | : Recording is completed. After ACompletedB is displayed |
| for 3 seconds, AStandbyB will be displayed. |
Timeout | : 30 seconds has passed since recording started. |
| (Operation for the 30 seconds has been recorded.) After |
| ATimeoutB is displayed for 3 seconds, AStandbyB will be |
| displayed. |
Memory Full | : The operation has exceeded the number of recordable |
| operations. Further recording cannot be made even if it is |
| within 30 seconds. (Operations before the limit are |
| recorded.)) After AMemory FullB is displayed for 3 seconds, |
| AStandbyB will be displayed. |
B Pan /Tilt /Zoom Pan/Tilt operation
| Click the arrow buttons to move the display area in the direction indicated by the arrow. |
| ||
| Release the button to stop the movement. |
| ||
| Click the [H] button to move to the home position. |
| ||
| Zoom operation |
| ||
| Use this function to perform zoom operation on the display area. |
| ||
| [+] | : Zoom is set to TELE and the object becomes bigger. |
| |
| : Zoom is set to WIDE and the object becomes smaller. |
| ||
| Ratio to Full Area |
| ||
| Shows current ratio to full area. |
| ||
| Memo: |
|
| |
|
|
| ||
|
| ● You can restrict the magnification of the object using the [+] button by altering the |
| |
|
| [Zoom Limit] settings. (A Page 69) |
| |
|
|
|
| |
|
|
| ||
C Speed | This item sets the operation speed. |
| ||
| Pan/Tilt | : This item sets the operation speed of the [Pan/Tilt] operation |
| |
|
|
| button.Increase the number to increase the operation speed. |
|
|
|
| [Setting range:1 to 8] |
|
| Zoom | : This item sets the operation speed of the [Zoom] operation |
| |
|
|
| button.Increase the number to increase the operation speed. |
|
|
|
| [Setting range: 1 to 4] |
|
111