PTZ Control

For operating the camera and adjusting the angle and image quality of the

 

 

position to be registered.

 

 

 

 

A Auto

For selecting the operation.

 

Function

[Start]

: Start the selected Auto function.

 

 

[Stop]

: Stop the running Auto function.

Memo:

●When AAuto PatrolB is selected, the patrol mode list is displayed.

●When AIntelligent TrackingB is selected, the target’s list is displayed.

Auto Pan

: The configured Auto Pan operation is performed.

 

(A Page 109)

Auto Patrol

: The configured Auto Patrol operation is executed. Select

 

AAuto PatrolB.(A Page 72)

Auto Trace

:The configured Auto Trace operation is performed.

 

(A Page 111)

Auto Tracking

: Auto tracking is performed. (A Page 67)

Motion detection does not work during Auto Tracking. Intelligent Tracking

: Intelligent tracking is performed. (A Page 116)

Note:

●When the [Mode] item of [Auto Return] is set to AAuto PatrolB and Auto Patrol starts in this screen, the AAuto PatrolB mode of [Auto Return] will be changed to the mode that was started in this screen. [Auto Return] (A Page 66)

●When AAuto PanB starts, the camera will repeat the left rotate, right rotate or return operations.

●When AAuto PatrolB starts, the camera will complete a series of operations and return to the start position, and then repeat the entire process. When Auto Trace starts, the camera will perform a series of operations before returning to the start position. It will resume after 30 seconds. If Auto Return function is set, the Auto function that was started manually is stopped when AAuto ReturnB starts.

B Preset

For selecting the preset position. When the selected position has been

Position

registered, the camera will move to the selected position.

 

[Setting range: HOME, 1 to 19]

113