Operation

Built-in Viewer (continued)

JPEG Viewer Settings (continued)

 Stream

For specifying settings for receiving JPEG stream.

 

 

 

 

 

 

A Stream

For selecting the protocol when the viewer acquires data from the

 

 

 

camera.

 

 

 

When AHTTPB is selected, lost packets are recovered via resending.

 

 

 

Camera may be monitored using multiple viewers when AMulticastB is

 

 

 

selected. When playing back via multicast, start multicast sending on the

 

 

 

[Streaming] page.

 

 

 

[Streaming Page] (A Page 82)

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

 

● When Built-in Viewer is launched with AMulticastB specified, a

 

 

 

 

Windows firewall warning may appear. In this case, select AunblockB

 

 

 

 

and proceed.

 

 

 

 

● If AblockB is selected, the Windows firewall will block the multicast

 

 

 

 

stream and playback of AMulticastB by the viewer will fail.

 

 

 

 

 

 

 

 

 

 

 

 

B HTTP Port

You can change the HTTP port number.

 

 

 

The default port number setting is A80B.

 

 

 

Specify the same value as the parameter that is set on the [Protocol]

 

 

 

page of the camera. (A Page 81)

 

 

 

 

 

 

C Frame Rate

For selecting the acquisition frame rate of the viewer.

 

 

 

Selecting a large frame rate will increase the processing load of the

 

 

 

computer on which the viewer is running.

 

 

 

[Setting values:30, 25, 15, 10, 7.5, 6, 5, 3, 2, 1, 1/2, 1/3, 1/5, 1/10, 1/15,

 

 

 

1/20, 1/30, 1/60]

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

 

 

● Set to a rate such that the CPU burden of the computer does not

 

 

 

 

exceed 80 %. If the CPU is overloaded, the computer may not

 

 

 

 

function properly.

 

 

 

 

 

 

 

 

 

 

 

 

D Multicast IP

You can change the multicast IP address.

 

 

Address

The default IP address setting is A225.0.1.1B.

 

 

 

 

 

 

E Multicast Port

You can change the multicast port number.

 

 

 

The default port number setting is A49152B.

 

 

 

Memo:

 

 

 

 

 

 

 

 

 

● This is enabled when [Start] is selected for the[JPEG] [Control] item

 

 

 

 

on the [Streaming] page.

 

 

 

 

● Specify the same value as the parameter that is set on the

 

 

 

 

[Streaming] page of the camera. (A Page 82)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other

 

 

 

 

 

 

 

 

 

 

A Folder Name

For specifying the name of the folder in which the captured files are

 

 

 

stored. (When the viewer is installed: AVN-V685B(VN-V685U),AVN-

 

 

 

V686BB(VN-V686BU/VN-V686WPBU)

 

 

 

 

 

 

 

 

118