Operation

Built-in Viewer (continued)

MPEG4 Viewer Settings (continued)

 Title Bar

For setting display items on the viewer screen.

 

 

For the MPEG4 Viewer, characters are displayed in the title bar of the window.

 

 

 

 

A Camera ID

Select AOnB to display [Camera ID]. (Up to 16 alphanumeric characters will be

 

 

displayed.)

 

 

[Camera ID] can be specified on the [Basic Settings2] or [Camera] page. (A Page 51)

 

 

 

 

B Position Title

Select AOnB to display the title of the position that is being displayed.

 

 

 

 

C Tracking Frame

When AOnB is selected, the AIntelligent TrackingB status appears as AStandbyB,

 

 

ARecordingB, or ACompletedB on the screen. (A Page 69).

 

 

 

 

D Time

Select AOnB to display the time.

 

 

 

 

E Format

Select the format for displaying time.

 

 

YYYY, MM, and DD denote year, month and day respectively, while HH, MM, and SS

 

 

denote hour, minute and second respectively. mm is equivalent to 1/100 seconds.

 

 

 

 Stream

For specifying settings for receiving MPEG4 stream.

 

 

 

 

A Stream

For selecting the protocol when the viewer acquires data from the camera.

 

 

When AHTTPB is selected, lost packets are recovered via resending. Camera may be

 

 

monitored using multiple viewers when AMulticastB is selected.

 

 

Memo:

 

 

 

 

 

 

 

● When playing back via multicast, start multicast sending on the [Streaming] page

 

 

of the camera unit.

 

 

[Streaming Page] (A Page 82)

 

 

Note:

 

 

 

 

 

 

 

● When Built-in Viewer is launched with AMulticastB specified, a Windows firewall

 

 

warning may appear. In this case, select AunblockB and proceed.

 

 

● If AblockB is selected, the Windows firewall will block the multicast stream and

 

 

playback of multicast by the viewer will fail.

 

 

 

 

 

 

 

 

B HTTP Port

You can change the HTTP port number.

 

 

The default port number setting is 80.

 

 

Specify the same value as the parameter that is set on the [Protocol] page of the

 

 

camera. (A Page 81)

 

 

 

 

C Multicast IP

You can change the multicast IP address.

 

Address

The default address is 225.0.2.1.

 

 

 

 

D Multicast Port

You can change the multicast port number.

 

 

The default port number setting is 59152.

Memo:

●This is enabled when AStartB is selected for the [JPEG Control] item on the [Streaming] page.

●Specify the same value as the parameter that is set on the [Streaming] page of the camera. (A Page 82)

120