Network SettingNetwork Setting

IP Address Settings (continued)

IP address setting for the camera

1 Click [Advanced Settings] of the Built-in Viewer

Click

2 The [Basic Settings1] screen appears

C

A

B

ASpecify the [DHCP Disable].

●When selecting ADHCP EnableB:

The default setting is ADHCP EnableB (DHCP client function is Enabled). To assign an IP address from the DHCP server, connect the DHCP server to the LAN, set the [DHCP Disable] of the camera to ADHCP EnableB, and click the [OK] button. For details on IP addresses assigned to the camera, consult your network administrator.

●When selecting ADHCP EnableB:

Select ADHCP EnableB, and specify a value in the [IP address], [Subnet Mask] and [Default Gateway] fields.

Note:

●Set the DHCP server such that the same IP address is always assigned to the MAC address of the camera by the DHCP server. Connection may fail if the above setting is not performed.

42