Setting Using Internet Explorer

Basic Settings2

Page for setting fundamental parameters of Camera, JPEG and MPEG4.

●This page can be used during access using AadminB or AoperatorB.

●Click [Basic Settings2].

●Press the [OK] button to enable the new settings.

●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

Click

A

B

C

D

E F G H I

Memo:

●You can open the [Basic Settings2] screen without going through Built-in Viewer by entering direct URL address in the address field of Internet Explorer.

When the IP address of the camera is 192.168.0.2 for example, enter the URL below.

VN-V685U:http://192.168.0.2/cgi-bin/v685display.cgi?v685basicmenu2.html VN-V686BU/VN-V686WPBU :http://192.168.0.2/cgi-bin/v686display.cgi?v686basicmenu2.html

48