H Stabilizer | This function prevents image shaking caused by vibration. |
| |||
| Set this function to AOnB to control image shaking. |
| |||
| Off | : Disabled. |
| ||
| On | : Enabled. |
| ||
| Memo: |
|
|
| |
|
|
|
| ||
|
| ● When the function is set to AOnB, the screen is digitally zoomed to |
| ||
|
| approximately 1.3 times. |
| ||
|
| ● Adjustment is disabled in the electronic zoom area. |
| ||
|
| ● Adjustment is disabled for about 1 minute after power ON and during |
| ||
|
| Pan/Tilt/Zoom operation. |
| ||
|
| ● Adjustment may not work when the vibration is fast. The effect can be |
| ||
|
| small when vibration direction does not match with Pan/Tilt position. |
| ||
|
| Depending on the installation environment, the stabilizer may malfunction |
| ||
|
| and increase image shaking due to the vibration transmitting to the |
| ||
|
| camera. In this case, set the stabilizer to AOffB. |
| ||
|
|
|
| ||
|
|
| |||
I Stabilizer Level | This item allows you to set the adjustment level of the [Stabilizer] item H in 3 |
| |||
| steps. |
|
| ||
| The adjustment volume is larger if the value is set to AHighB rather than |
| |||
| AMidB. When it is set to ALowB, the adjustment volume is lesser than |
| |||
| compared to when it is set to AMidB. |
| |||
| [Setting value:Low,Mid,High] |
| |||
|
|
| |||
J Noise Reduction | When AOnB is set, image noise on the screen will be reduced. |
| |||
| Memo: |
|
|
| |
|
|
|
| ||
|
| ● This item is only enabled when [AGC] item K is set to a value other than |
| ||
|
| AOffB. |
|
| |
|
| ● Image noise in dark images will be reduced but the resolution will |
| ||
|
| deteriorate. |
| ||
|
| ● The edges between high and low illumination area may appear rough. |
| ||
|
|
|
| ||
|
|
| |||
K ALC | For setting the priority of ALC (feature for maintaining the video level |
| |||
| according to the brightness of the object). You can select whether to assign |
| |||
| priority to the motion or picture quality when the object becomes dark. |
| |||
| Motion | : Prioritizes movement. |
| ||
|
|
|
| When the object becomes dark, priority is given to AGC |
|
|
|
|
| (automatic gain control), and therefore this is suitable for |
|
|
|
|
| shooting |
|
| Quality | : Prioritizes image quality. |
| ||
|
|
|
| When the object becomes dark, priority is given to the Sense |
|
|
|
|
| Up feature, and therefore this is suitable for shooting objects |
|
|
|
|
| requiring a high picture quality. |
|
| [Setting value:Motion,Quality] |
| |||
|
|
|
|
|
|
53