Setting Using Internet Explorer

Setting (continued)

Encoding Page

This page is for setting JPEG and MPEG4 encoding parameters.

This page can be used during access using AadminB or AoperatorB.

●Click [Advanced Settings] to display setting menu.

●Click [Encoding]. Press the [OK] button to enable the new settings. Press the [OK] button to enable the new settings.

●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

●When settings on this page are altered during playback using Built-in Viewer, reboot the Built-in Viewer.

●There is a maximum limit to the bit rate for transmission by the camera. If a bit rate that exceeds the maximum limit is specified, this new setting will not be applied. For details on the maximum transmission limit, refer to [Network Requirements] (A Page 33).

Click

 

 

 

 

A

 

 

 

 

 

 

 

 

 

B

C D E F G

A Frame Size

For setting the frame size of each JPEG or MPEG4 screen to AVGAB (640 x

 

480) or AQVGAB (320 x 240).

 

Select one of the four different patterns.

 

 

56