JVC LST0819-001A, VN-685U, VN-686BU, VN-686WPBU manual 52

Setting Using Internet Explorer

Setting (continued)

Camera Page (continued)

D Gamma		To alter the appearance of dark areas in a video image, adjust the gamma
		curve.
		0		: Gamma correction suitable for CRT is performed.
		1		: Gamma correction suitable for some LCDs is performed.
		2		: Do not perform gamma correction. This setting is suitable for
				some LCDs.
		Active		: The most appropriate gamma correction is applied according to
				the darkness of the screen. Select the level under [Active
				Gamma Level].
		[Setting value:0, 1, 2, Active]
		Memo:
			● The set value is fixed when the [Monitor Type] B is set to ALCD1B,
			ALCD2B, or ACRTB.
	Active Gamma	This adjusts the effect when [Gamma] D is set to AActiveB.
	Level	Objects with little luminance differenceBDecrease the number
		Objects with large luminance differenceBIncrease the number
		[Setting range:-5 to 0 to 5]
		Memo:
			● The color may appear different from the actual one depending on the
			object.
			● Noise interference and hue changes may appear prominent depending
			on the brightness of the object but this is not a malfunction.
			● This feature can only be configured when [Gamma] D is set to AActiveB.
E Enhance		For setting the type of edge enhancement.
	Frequency	Low		: Enhanced edges become thicker.
		High		: Enhanced edges become thiner.
		[Setting value:Low, High]
		Memo:
			● The set value is fixed when the [Monitor Type] B is set to ALCD1B,
			ALCD2B, or ACRTB.
F Enhance Level		For setting the intensity of edge enhancement.
		Larger value			: Increases the intensity of edge enhancement.
		Smaller value			: Decreases the intensity of edge enhancement.
		[Setting range:-5 to 0 to 5]
G Color Level		For adjusting the color level.
		Larger value			: Increases the color level.
		Smaller value			: Decreases the color level.
		[Setting range:-5 to 0 to 5]

52