Setting Using Internet Explorer
Setting (continued)
Motion Detection Page (continued)
A Display Screen |
| The screen is divided into blocks of 10 (horizontal) x 8 (vertical). You can |
| |
|
| specify whether to enable motion detection in each block. Clicked block |
| |
|
| turns blue. Click again to return to the original natural color. When the block |
| |
|
| turns blue, it is unmasked and motion can be detected. Press the [OK] |
| |
|
| button to enable this setting. When the screen of the block is in its natural |
| |
|
| color, it is masked and motion cannot be detected in it. All blocks are |
| |
|
| masked in the default setting. |
| |
|
| Press the [OK] button to enable this setting. |
| |
|
| Use the [Mask All] button to mask all blocks. |
| |
|
| Use the [Clear Mask] button to unmask all blocks. |
| |
|
|
|
| |
B Detection |
| For setting motion detection to On/Off. |
| |
|
| Press the [OK] button to enable motion detection in the unmasked blocks. |
| |
|
| Memo: |
|
|
|
|
|
| |
|
| ● Even though motion detection is set to AOnB, the motion of masked |
| |
|
| blocks cannot be detected. |
| |
|
|
|
| |
|
|
|
| |
C OK/Cancel |
| To apply the new parameters, press the [OK] button. Press the [Cancel] |
| |
|
| button to cancel the change. |
| |
|
|
|
| |
D Level |
| For setting the sensitivity of motion detection. |
| |
|
| Increasing the number raises the detection sensitivity level, and hence it is |
| |
|
| more sensitive. |
| |
|
| Press the [OK] button to enable this setting. |
| |
|
| [Set values : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10] |
| |
|
|
|
| |
E Mask All |
| Masks all blocks. |
| |
|
| Press the [OK] button to enable this setting. |
| |
|
|
|
| |
F Clear Mask |
| Unmasks all blocks and enables the current motion detection and detection |
| |
|
| sensitivity settings. |
| |
|
| Press the [OK] button to enable this setting. |
| |
|
|
|
|
|
Memo:
●The area display position serves as a reference. Make sure to perform operation check.
●The screen is divided into blocks of 80 (10 horizontal x 8 vertical).
Set the angle of view such that the size of the object for which motion is to be detected is larger than the size of multiple blocks.
Note:
●This feature may not function properly depending on the conditions of the object and settings.
●Flickers of fluorescent lamps may cause motion detection.
●Changes in brightness due to the light source may be detected as motion.
●The motion detection feature is not intended to prevent theft or fire.
●Our company shall not be liable for any accident or damage that occurs.
44