Setting Using Internet Explorer

Setting (continued)

Maintenance Page

This page is for maintenance purposes.

This page can be used during access using AadminB.

●Click [Advanced Settings] to display setting menu.

●Click [Maintenance].

A

B

C

Click

A Restart

Restarts the camera. (It takes about one minute for the camera to restart.)

 

 

B All Settings

Restores all settings to their default values and reboots the unit. (It takes

AInitializeB

about one minute for the camera to initialize and reboot.)

Passwords will also be initialized. The built-in clock of the camera will not be

 

 

affected. JPEG/MPEG4 transmission and all others services that are

 

running will be discontinued.

 

 

C Update

Upgrades the firmware version of the camera and reboots the unit.

 

The settings of the camera will be saved. Copy the new firmware file to the

 

computer on which Internet Explorer is used, and specify this file using the

 

[Browse...] button. Press the [Update] button to start the update. JPEG/

 

MPEG4 transmission and all others services that are running will be

 

discontinued. The update process may take several minutes.

 

A message will be displayed on the Internet Explorer when update is

 

successfully completed.

Note:

●Do not turn off the power when update is in progress or during reboot after update is complete. Turning off the power of the camera may cause it to malfunction.

●Before update, end the accesses to the camera from pages other than this page (Built-in Viewer etc). If update is started while accesses other than this page are valid, access to this page might be cut off. In that case, end the accesses other than this page, access to this page again to redo the update.

54