Setting Using Internet Explorer
Setting (continued)
Time Page
This page is for setting time.
This page can be used during access using AadminB.
●Click [Advanced Settings] to display setting menu.
●Click [Time].
●Press the [OK] button to enable the new settings.
●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
A
B
C
D
E
F
Click
A SNTP | For setting the SNTP client feature. |
| When this is set to AOnB, the system accesses the specified NTP server at |
| regular intervals to acquire the time. |
| In addition, time will be recorded in the JPEG headers distributed by the |
| camera. Discontinuity in JPEG header’s time may occur immediately before |
| and after acquiring time from the NTP server. |
|
|
B NTP Server | For setting the IP address of the NTP server. |
|
|
C Access Interval | For setting the time interval for access to the NTP server. |
|
|
D Time | Displays the time on the clock of the camera. |
| The clock time can be changed by entering an appropriate value. (Second |
| value cannot be specified.) |
| In addition, time will be recorded in the JPEG headers distributed by the |
| camera. Discontinuity may occur in the JPEG header’s time immediately |
| before and after changing the time. |
|
|
E Time Zone | For setting the time zone. |
|
|
F Pc time to | Click [Set] to load the clock time of the computer in use on the camera. |
Camera |
|
|
|
52