Destination Address Restrictions may be imposed on clients accessing the camera using the IP address.
A Access When AdenyB is selected, acquisition of JPEG / MPEG4 / Audio via the IP Restrictions address specified for the [IP Address] item will be denied. Restrictions are
not imposed on access to the Web Settings page.
When AallowB is selected, acquisition of JPEG / MPEG4 / Audio via the IP address specified for the [IP Address] item will be permitted. Restrictions are not imposed on access to the Web Settings page.
B IP Address When a multicast address is specified and AdenyB is selected, camera will deny transmission to this multicast address.
When a multicast address is specified and AallowB is selected, camera will only accept transmission to this multicast address and deny transmission to multicast addresses that are not stated in the [IP Address] field.
Note:
●Note that when AallowB is selected and all IP address fields are left blank, JPEG / MPEG4 / Audio acquisition by all IP addresses will be denied.
Restrictions are not imposed on access to the Web Settings page.
Additionally, Camera will also deny access when instructions for transmission to the specified IP address are sent via API.
Memo:
●To specify a specific IP address range, enter a combination of the IP address and subnet mask in the [IP Address] field.
●Define the subnet mask using a length between 8 to 30 bits.
For example, a range between 192.168.0.0 to 192.168.0.255 is denoted as 192.168.0.0/24 ([IP Address]/[bit length of subnet mask]).
51