Remote control buttons and functions

•If the main-picture signal is poor, the quality of the sub-picture may also be poor.

•If the pictures have different standards, the top and bottom of one of them may be missing.

•If you press the menu button when the PIP functions is on, PC menu will appear. To display the TV menu, change the mode to the TV mode.

Operating a JVC brand VCR or DVD player

These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control.

1Set the VCR/TV/DVD switch to the VCR or DVD position

VCR:

When you are using a VCR, set the switch to the VCR

position. You can turn the VCR on or off with the (Standby) button.

DVD:

When you are using a DVD player, set the switch to the DVD position. You can turn the DVD player on or off with the (Standby) button.

2Press the VCR/DVD Control Button to control your VCR or DVD player

•If your device is not made by JVC, these buttons will not work.

•Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using.

•You can use the p/buttons to choose a TV channel the VCR will receive, or choose the chapter the DVD player plays back.

•Some models of DVD player use the p/buttons for both operating the fast forward/backward functions and for choosing the chapter.

•Set the VCR/TV/DVD switch to the TV position when you turn the TV on or off.

14