ENGLISH - 26 -
selected page is found.
 Press   button to display the selected
Teletext page.

To exit Teletext

 Press   button. The screen will switch to
TV mode.

Fastext and Toptext

Your TV supports the 7 page Teletext system.
When the page number of any of the 7 pages
in memory is entered, the system will not
search for the requested page; instead it will
display the page automatically.
 Press   button to move the Teletext
screen forward one page at a time.
 Press   button to move the Teletext
screen backward one page at a time.
For Fastext and Toptext
The subject-heading for the information may
have a particular colour.
 Press an appropriate RED, GREEN, YELLOW
or BLUE button in order to reach the relevant
page quickly.
For TOPTEXT
If Toptext transmission is present, colour
coded buttons will appear in status row.
If Toptext transmission is not present, status
row will not appear.
In Toptext mode the   or   com-
mands will request the next or previous page
respectively. If Toptext transmission is not avail-
able, in case of operation of these commands,
wraparound occurs. For example page 100
appears to be one greater than page 199.
Peripheral EquipmentConnections
There is a wide range of audio and video equip-
ment that can be connected to your TV.
Connection diagrams at the end of this sec-
tion show you where the different equipment
should be connected at the back side of the
TV.

Via the Euroconnector

Your TV set has 2 Euroconnector sockets. If
you want to connect peripherals (e.g. video,
decoder, etc.) which have Euroconnectors, to
your TV, use SCART input.
If an external device is connected via the
Euroconnector socket, the TV is switched to
AV mode automatically. In this case if both sock-
ets are connected SCART1 has the prece-
dence.

T-V Link compatible VCR

Be sure to connect the T-V Link compatible
VCR to the EXT.2 terminal. If not, the T-V Link
function will not work properly.
 When connecting a T-V Link compatible VCR
to the EXT.2 terminal, be sure to connect the
decoder to the VCR. If not, the T-V Link func-
tion may not work properly. And then set the
DECODER(EXT-2) function for the channel to
ON to unscramble a scrambled channel.

RGB mode

If an equipment can output the RGB signals,
connect it to the EXT-1 or EXT-2 terminal.

EXT-2 S Mode

If the equipment connected to your TV set sup-
ports S-Video (Y/C) output from Euroconnec-
tor, you can have a better picture quality by
selecting EXT-2 S mode and connecting your
equipment to the EXT.2 (EXT-2 S) terminal of
TV. See your equipments booklet to check if
your equipment has such feature.

Via the RCA jacks

If you have an equipment (such as a Cam-
corder) which has the RCA jacks, connect it to
the EXT-4 terminal with the video and audio
cables.