ENGLISH - 18 -
In EXT mode, Install menu appears like this:
You can change only Colour system and
VCR.
Selecting Programme
 Using   or   button select Programme.
 To select programme number, you can use
 /   button or Digit Buttons.
Selecting Band
Band, can be chosen either,
 C or S by  or   button.
Selecting Channel
Channel can be changed by  or  button
or by Digit Buttons.
Selecting Colour System
Using   or   button on Colour System,
you can change the colour system to PAL,
SECAM or Auto.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Selecting Sound System
Using   or   button on Sound System,
you can change the standard to B G, DK, I, L,
Lp.
Selecting Fine Tuning
You can use the Fine Tuning process for fine
adjustment (after coarse adjustment), if you
are not happy about the image on the screen.
Use   or   button on Fine Tuning item,
until getting the best image on the screen.
Selecting Search
To start the search process, press   button
for forward search or   button for backward
search. If a signal is found or reaches to end
of the band after searching, press   or 
buttons to continue search process. To stop
the search process when you want, press 
or   buttons at any time.
Decoder(EXT-2)
You can use this mode to connect any de-
coder to your TV.
 Press the   or   buttons to set it On or
Off.
When you select Decoder(EXT-2) On,
EXT-2 output will be chosen as TV mode only
and any scrambled channels will be un-
scrambled through decoder connected your
TV via EXT-2 output.
Setting VCR (Video Cassette Recorder )
Mode
 This item can be seen in TV, EXT-1, EXT-2,
EXT-3 and EXT-4 modes.
 If you want to watch a VCR source from one of
these modes, then it will be better to set VCR
mode on. For this, while the cursor is on
this item press the   or   buttons to set
it On.
 If you want to watch a DVD , then you must set
this item off; because DVD is not a source
like a VCR and to see the picture better, you
must set the VCR mode Off.
To Store Settings
 Press   /   or OK button on Store op-
tion to store Install menu settings.
 After stored, T-V Link menu will appear. If you
do not need to do T-V Link, select Cancel
and press   or OKbutton to exit the menu.
Program Menu
Press MENU button, now you are in main
menu. In the main menu, select Program
using   or   button. Then enter the
Programme menu by pressing   /   or
OK button.
Note: There is no Program menu in any EXT
modes.