ENGLISH - 20 -

Source Menu

You can switch your TV to E XT modes by
pressing directly to AV button or by selecting
in source menu from the main menu.
While in EXT mode, you can also switch your
TV to TV or other EXT modes by selecting in
source menu from the main menu.
In main menu, firstly use   or   button
then use   /   or OK button to enter
Source menu. In source menu, move the cur-
sor by   or   button and then press OK
button or   /   buttons when the cursor is
on the required item. The selected mode
comes automatically on the screen.
Other Features

TV Status

Programme Number, Programme Name (or
EXT), (they are displayed on the upper left of
the screen). The sound indicator is displayed
with them too. They are displayed after
programme change for 3 seconds.

Sound Indicator

The alternatives of the indicator are Mono, Ste-
reo, Dual I and Dual II. This indicator is dis-
played under the programme number indica-
tor on the screen. I-II button is used to select
Mono or Stereo, or Dual I or Dual II.

0RQR

In Mono broadcast or in forced-mono (for ste-
reo broadcast).
6WHUHR
In Stereo broadcast.
'XDO,
If dual broadcast detected. Dual I is selected
in default and also can be selected after Dual
II by Remote Control.

'XDO,,

If Dual II is selected by Remote Control.

Hyper Sound

By selecting Hyper Sound in sound menu or
by pressing the   button on your remote
control, Pseudo/Spatial effect can be turned
on or off. In Mono transmission the left and
right channels will be added at left channel
and dummy stereo effect will be introduced to
end-user.
In stereo transmission it yields a phase differ-
ence between left and right channels. Hyper
Sound selection will be displayed on the
screen when the TV Status button is pressed
or programme is changed.