•Teletext page number will be displayed on the upper left corner of the screen when the selected page is found.
•Press “ 
“ button to display the selected Teletext page.
To Exit Teletext
•Press “
” button. The screen will switch to TV mode.
Fastext
Your TV supports the 10 page Teletext system. When the page number of any of the 10 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically.
•Press “
” button to move the Teletext screen forward one page at a time.
•Press “
” button to move the Teletext screen backward one page at a time.
For Fastext
The subject-heading for the information may have a particular color.
•Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly.
For TOP text
TOP text mode of operation will be activated automatically according to the transmission.
•If TOP text transmission is present, color coded buttons will appear in status row.
•If TOP text transmission is not present, sta- tus row will not appear.
The subject-heading for information may be located in colored box.
In Top mode the “
or 
” commands will request the next or previous page respec- tively. If TOP text transmission is not available, in case of operation of these commands, wraparound occurs. For example page 100 appears to be one greater than page 199.
ConnectPeripheral
Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you where the different equipment should be connected at the back or right side of the TV.
Via The Euroconnector
TFT TV has 2 Euroconnector sockets. If you want to connect peripherals (e.g. video, de- coder, etc.) which have Euroconnectors, to the TV, use Scart 1 or Scart 2 inputs.
If an external device is connected via Euro- connector sockets TV is switched to EXT mode automatically. If the signal is RGB, select RGB in the source select menu to view picture. If the external device is connected to Scart 1, choose Scart 1 RGB. If the external device is connected to Scart 2, choose Scart 2 RGB.
Via Ant Input
If you want to connect to your TV, peripherals like video recorders or decoders, but the device you want to connect does not have Euro- connector, you should connect it to the ANT input of the TV.
If the VCR is connected via antenna input it is suggested to use the Programme 0.
Decoder
Cable TV offers you a wide choice of programs. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broadcasting organisation whose programmes you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled.
For further information ask your dealer. See also the booklet supplied with your decoder.