Technical information

What is T-V LINK?

T-V LINK allows the TV to share information easily with a connected T-V LINK compatible device. By using T-V LINK :

You can send the ATV channel information programmed on the TV to the T-V LINK compatible device, so that both the TV and the external device have the same channel settings. When connecting a new external device, channel information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer to the external device's manual.

You can easily record the TV programme you are viewing on a T-V LINK compatible device by using the "DIRECT REC" feature. For more details, refer to the external device's manual.

After timer-record setting, the TV will instruct the recorder to start and stop recording, via DIRECT REC.

What is ACI (Automatic Channel Installation)?

Some cable companies transmit a signal called ACI which contains information that allows TV channels to be registered automatically on your TV.

When an ACI signal is received, "ACI START/ACI CANCEL" appears in the "AUTO PROGRAM" screen.

PC Signals that can be displayed

*Macintosh* computers are not supported. (Macintosh is a registered trademark of Apple Computer, Inc.)

If the signal doesn't appear, check that the vertical frequency on the PC is set to 60Hz.

Resolution

640 x 480 (VGA)

1024 x 768

(XGA)

 

 

 

 

Vertical frequency (Hz)

60.0

60.0

 

 

 

 

 

Horizontal frequency (kHz)

31.5

42.0

 

 

 

 

 

Connect DVI devices

Connect a DVI device to EXT-5 (HDMI) using DVI-HDMI conversion cable. Connect analogue sound output of the DVI device to L and R terminals in EXT-4.

Set AUDIO in HDMI SETTING to ANALOGUE or AUTO (P. 33)

If you accidentally cut the power cord

Attach a new plug following the steps below. If in doubt, contact your local retailer.

Important

Never connect to the larger terminal marked with an "E", the safety earth symbol "" or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured with the following code:

·Blue: Neutral wire (connect to the black terminal, or one marked "N")

·Brown: Live wire (connect to the red terminal, or one marked "L")

Change the fuse in the plug

Open the plug as illustrated on the right.

When replacing the fuse, always use a correctly rated and approved type and re-fi t the fuse cover when fi nished.

If in doubt, contact your local retailer.

Fuse

Licence

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897.

BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

46