JVC LT-40X667 manual Digital-In, Digital-in1 Audio

Onscreen Menus

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.

	Press the MENU button
π†	To DIGITAL-IN
è	To enter
π†	To select AUTO, SIZE1 or SIZE2
	Press the MENU button to finish

INITIAL SETUP

PREVIOUS

DIGITAL-IN	SIZE1
DIGITAL-IN1 AUDIO	DIGITAL
NEXT PAGE	(1/5)
SELECT OPERATE	MENU EXIT

Notes:

•The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is input to the Digital-In terminal and the picture is being displayed on the screen.

•You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the televison will select "SIZE1" or "SIZE2" automatically.

Digital-in1 Audio

This feature is used if you have a DTV or HDMI compatible component connected to your TV.

	Press the MENU button
			INITIAL SETUP
π†	To DIGITAL-IN1 AUDIO		PREVIOUS
		DIGITAL-IN		SIZE1
è	To select ANALOG, DIGITAL or AUTO
		DIGITAL-IN1 AUDIO		DIGITAL
	Press the Menu button when finished
Notes:
• If you connect the HDMI device to the HDMI 1, choose			NEXT PAGE	(1/5)
			SELECT OPERATE	MENU EXIT
DIGITAL. If you connect the DVI device to the HDMI 1,
choose ANALOG.

•Refer to your DTV or HDMI component’s instruction manual for more information.

•When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically, depending on the audio input from the HDMI.

•When you select DIGITAL, select PCM on Digital Sound menu. See page 54.

52