Additional preparation

ENGLISH

„Connecting devices to the OUT terminal

The signals of the images and sound you are currently viewing with this TV are output through the OUT terminal. By connecting a VCR to the OUT terminal, you can record the currently shown image and sound to that VCR. To do this, connect the VCR and OUT terminal following the steps below.

1Connect the VIDEO or S-VIDEO in the OUT terminals and the VCR’s VIDEO IN (video input) terminal with a video cable or an S-VIDEO cable

No signal will output through the S-VIDEO terminal when you are not viewing images coming from the S-VIDEO input. In this case, use the VIDEO terminal instead of the S-VIDEO terminal.

2Connect the AUDIO (L and R) in the OUT terminals and the VCR’s AUDIO IN (audio L/R input) terminals with an audio cable

When you turn off the TV, the signals from the OUT terminal are also turned off.

No signal is output when VIDEO-4 is chosen.

„Connecting headphones

The output from the AUDIO OUT terminal is not interrupted by headphone connection to the TV. You cannot cut the sound from the front speaker even if you connect a headphone to the TV.

Adjust the volume of the external speakers with the amplifier.

Connect the headphones with a stereo mini-jack (of 3.5 mm in diameter) to the headphone jack at the TV.

The headphone volume is adjusted with the “HEADPHONE” menu (see page 22).

„Connecting Speakers/Amplifier

See the Audio equipment connection diagram, then connect the audio equipment you desire to the TV.

You can use external front speakers to listen to the TV sound instead of the TV speakers.

Before connecting anything:

Read the manuals provided with the amplifier and speakers.

Turn the TV and amplifier off.

To prevent magnetism from the speakers adversely affecting the TV screen, use magnetically-shielded speakers for the front speakers.

Note that connecting cables are not supplied.

without terminal covers

L R

OUT

S-VIDEO

VIDEO

VIDEO

L

AUDIO

R

1Amplifier

2External speakers (Magnetic-shielded type)

30