Setting up your TV
ENGLISH
Connecting the aerial and VCR
•Aerial cable is not supplied. Use a good quality
•Read the manual that came with the VCR before connecting.
If not connecting a VCR (follow 1):
Connect an aerial cable to the aerial socket on this TV.
If connecting a VCR:
1Connect the aerial cable to the aerial input socket on the VCR, and connect the VCR and TV with another aerial cable
2Connect the VCR’s VIDEO OUT (video output) terminal and the TV’s VIDEO terminal with a video cable
To connect a VCR to the TV with an
Note that the connection with a video cable will be ignored in case you connect a VCR to the TV with both video cable and
3Connect the VCR’s VIDEO OUT (audio L/R output) terminals and the TV’s AUDIO terminals with an audio cable
•To connect additional external devices, please see “Connecting the external devices” on page 29.
without terminal covers
VIDEO
VIDEO
L
AUDIO
R
VIDEO
VIDEO
Connecting the power cord to the AC outlet
Insert the AC plug on the power cord from the TV into AC outlet. The power lamp will light and the TV will enter standby mode.
Caution
•Operate only from the power source specified (AC 110
–240 V, 50/60 Hz) on the unit.
•Remove the AC plug from the outlet to completely disconnect the TV from the power supply.
L
3 2
1
1
6