46
LT-Z37DX5 / LCT1961-001A / English
ENGLISH
Additional preparation

Connecting external equipment

Connect the equipment to the TV, making
the correct rear panel and front panel
connections.
Before connecting anything:
• Read the manuals that came with the
equipment.
Depending on the equipment, the
connection method may be different from
the diagram. Also, the equipment settings
may need to change depending on the
connection method.
• Turn off all the equipment including the TV.
• The “Specifications” on page 54 give the
details of the VIDEO terminals. If you are
connecting equipment not listed in the
following connection diagram, see the
table to choose the best VIDEO terminal.
• Connecting cables are not supplied.
• If the VCR’s audio output is in mono,
connect the VCR’s AUDIO OUT (audio
output) terminal and the TV’s VIDEO-3
AUDIO L terminal with an audio cable.
• Use the supplied cable to connect the
component device to the VIDEO-1
COMPONENT Y Pb/Cb Pr/Cr terminal.

Connecting the PC

For details, see “Connecting to the computer”
on page 40.

Using a Media Card

For details, see “Using a Media Card” on
page 41.

Using the HDMI terminal

For details, see “Using the HDMI terminal”
on page 49.
1VCR (composite signal)
2VCR (S-VIDEO signal; Y/C)
3VCR for recording (composite signal)
4DVD player (composite signal)
5DVD player (S-VIDEO signal; Y/C)
6TV game (composite signal)
7TV game (S-VIDEO signal; Y/C)
8Headphones
9Camcorder (composite signal/S-VIDEO
signal; Y/C)
0DVD player (component video signals; Y,
Pb/Cb, Pr/Cr)
-Video cable
=Audio cable
~S-VIDEO cable
!Component cable
LT-Z37DX5_Eng.book Page 46 Tuesday, September 27, 2005 5:01 PM