Connection
7Precautions
Before connecting:
•Turn off the power to the amplifier before connecting the speaker system; otherwise, the speakers may be damaged.
•The impedance of the speaker is 6 Ω.
If this does not match with the speaker impedance range indicated on the amplifier, you cannot connect this system to the amplifier.
•The maximum power handling capacity of the
•Be sure to turn down the volume level on the amplifier to prevent unwanted noise before performing following operations:
–Turning on or off other components
–Operating the amplifier
–Tuning FM stations
–
–Continuously reproducing high frequency oscillation or high pitch electronic sounds
–Connecting or disconnecting a microphone
•When using a microphone, do not aim it at the speakers or use it near the speakers; otherwise, the howling which occurs may damage the speakers.
•Before replacing the cartridge, always turn off the power both to the amplifier and to the turntable; otherwise, the clicking noise may damage the speakers.
7Connecting the speaker system to the amplifier
• Twist and remove the insulation at the end of each speaker cord before connecting.
1 2 3
· terminal
ª terminal
(Black hoop)
(Red hoop)
SilverCopper
To the speaker ª terminal of amplifier
To the speaker · terminal of amplifier
•Make sure to match the polarity (ª and ·); otherwise, the surround effect will become less effective.
| About Speaker Grille |
| ||
English | ||||
|
|
| ||
The speaker grille is removable as illustrated below: | ||||
| Projections Holes |
| ||
Speaker grille
Speaker grille
To remove the speaker grille, insert your fingers at the top of the speaker grille, then pull towards you. Repeat the procedure at the bottom of the speaker grille.
To attach the speaker grille, put the projections of the speaker into the holes of the speaker grille.
• Do not push the speaker grille strongly.
Specifications
Type: | |
| |
Speakers |
|
Mid and low range: | 10.5 cm wooden cone |
Tweeter: | 2.0 cm wooden dome |
Power handling capacity: | 150 W |
Impedance: | 6 Ω |
Crossover frequency: | 3 800 Hz |
Frequency range: | 50 Hz to 50 000 Hz |
Sound pressure level: | 84.5 dB/W•m |
Dimensions (W x H x D): | 143 mm x 405 mm x 249 mm |
Mass: | 6.3 kg |
Supplied accessories: | • Feet (4) |
| • Speaker cord (3 m) (1) |
| • Screw hole caps (2) |
Design and specifications subject to change without notice.
5
