English
This System can play back following types of discs/files.
•Audio CD
•MP3/WMA files on a
Audio CD |
•This System may not play back some files even though their formats are listed above.
•In this manual, “file” and “track” are used interchangeably for MP3 and WMA operations.
Caution for DualDisc playback
The
Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Playing Back a USB Mass Storage Class Device
You can connect a USB mass storage class device such as a USB flash memory device, Digital Audio Player (DAP) to this System.
IMPORTANT
•You cannot connect a computer to the USB MEMORY terminal of the System.
•When connecting with a USB cable, use the USB 2.0 cable whose length is less than 1 m.
•Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.
•Always set volume to the minimum level when connecting or disconnecting the USB mass storage class device.
To connect the USB mass storage class device
When connecting a USB mass storage class device, refer also to its manual.
To place a disc
•You can place a disc while playing another source.
Label side
To play back a disc
To start: | To pause: | To stop: |
CD | CD | STOP |
| To release, press again. |
|
| USB | MEMORY |
|
| |
| AUD |
|
| IO IN | STOP |
|
| |
or | REMOTE | |
| SENSOR |
Digital Audio
Player
•When disconnecting the USB mass storage class device, make sure that the playback is stopped.
To play back files on the USB mass storage class device
To start: | To pause: | To stop: | |||
USB | USB | STOP | |||
MEMORY | MEMORY | ||||
|
|
| |||
|
|
|
|
| |
|
|
|
|
|
•The USB indicator on the display lights while USB MEMORY is selected.
8